rss

Wednesday, June 24, 2009

Step by step update Bios

Following this instruction carefully !…

Type 486/ Pentium / Pentium Pro etc.,ensure that upgrades are easily obtained by incorporating the system BIOS in a FLASH Memory component.

Motherboard With FLASH BIOS, there is no need to replace an EPROM component. Once downloaded, the upgrade utility fits on a floppy disc allowing the user to save, verify and update the system BIOS. A hard drive or a network drive can also be used to run the newer upgrade utilities. However, memory managers can not be installed while upgrading.

Most pre-Pentium motherboards do not have a Flash BIOS. The following instructions therefore do not apply to these boards. If your motherboard does not have a Flash BIOS (EEPROM) you will need to use an EPROM programmer to re-program the BIOS chip. See your dealer for more information about this.

Please read the following instructions in full before starting a Flash BIOS upgrade:
A. Create a Bootable Floppy (in DOS)

With a non-formatted disk, type the following:

               format a:/s

If using a formatted disk, type:

               sys a:

This procedure will ensure a clean boot when you are flashing the new BIOS.

B. Download the BIOS file

•Download the correct BIOS file by clicking on the file name of the BIOS file you wish to download.

•Save the BIOS file and the Flash Utility file in the boot disk you have created. Unzip the BIOS file and the flash utility file. If you don't have an "unzip" utility, download the WinZip for Windows 95 shareware/ evaluation copy for that one time use from _www.winzip.com or _www.pkware.com. Most CD ROMs found in computer magazines, have a shareware version of WinZip on them.

•You should have extracted two files:

Flash BIOS utility eg: flash7265.exe (for example)

BIOS eg: 6152J900.bin (example)

Use the latest flash utility available unless otherwise specified (either on the BIOS update page or in the archive file). This information is usually provided.

C. Upgrade the System BIOS

During boot up, write down the old BIOS version because you will need to use it for the BIOS backup file name.

Place the bootable floppy disk containing the BIOS file and the Flash Utility in drive a, and reboot the system in MS-DOS, preferably Version 6.22

•At the A:> prompt, type the corresponding Flash BIOS utility and the BIOS file with its extension.

For example:

flash625 615j900.bin

•From the Flash Memory Writer menu, select "Y" to "Do you want to save BIOS?" if you want to save (back up) your current BIOS (strongly recommended), then type the name of your current BIOS and its extension after FILE NAME TO SAVE: eg: a:\613J900.bin

Alternatively select "N" if you don't want to save your current BIOS. Beware, though, that you won't be able to recover from a possible failure.

Select "Y" to "Are you sure to program?"

Wait until it displays "Message: Power Off or Reset the system"

Once the BIOS has been successfully loaded, remove the floppy disk and reboot the system. If you write to BIOS but cannot complete the procedure, do not switch off, because the computer will not be able to boo, and you will not be given another chance to flash. In this case leave your system on until you resolve the problem (flashing BIOS with old file is a possible solution, provided you've made a backup before)

Make sure the new BIOS version has been loaded properly by taking note of the BIOS identifier as the system is rebooting.

For AMI BIOS
Once the BIOS has been successfully loaded, remove the floppy disk and reboot the system holding the "END" key prior to power on until you enter CMOS setup. If you do not do this the first time booting up after upgrading the BIOS, the system will hang.

BIOS Update Tips
note:
1.   Make sure never to turn off or reset your computer during the flash process. This will corrupt the BIOS data. We also recommend that you make a copy of your current BIOS on the bootable floppy so you can reflash it if you need to. (This option is not available when flashing an AMI BIOS).

2.   If you have problems installing your new BIOS please check the following:

Have you done a clean boot?
In other words, did you follow the above procedure for making a bootable floppy? This ensures that when booting from "A" there are no device drivers on the diskette. Failing to do a clean boot is the most common cause for getting a "Memory Insufficient" error message when attempting to flash a BIOS.

If you have not used a bootable floppy, insure a clean boot either by

a)  pressing F5 during bootup

b)  by removing all device drivers on the CONFIG.SYS including the HIMEM.SYS. Do this by using the EDIT command.

Have you booted up under DOS?
Booting in Windows is another common cause for getting a "Memory Insufficient" error message when attempting to flash a BIOS. Make sure to boot up to DOS with a minimum set of drivers. Important: Booting in DOS does not mean selecting "Restart computer in MS-DOS Mode" from Windows 98/95 shutdown menu or going to Prompt mode in WindowsNT, but rather following the above procedure (format a: /s and rebooting from a:\).

Have you entered the full file name of the flash utility and the BIOS plus its extension?
Do not forget that often you will need to add a drive letter (a:\) before flashing the BIOS. Example: when asked for file name of new BIOS file which is on your floppy disk, in case you're working from

c:\ your will need to type a:\615j900.bin, rather than 615j900.bin only.

Tag Technorati: {grup-tag},,
»»  READMORE...

Friday, June 12, 2009

ShortCut keyboard part3

For Compatible keyboard that includes the Windows logo key and the Application key , you can use these keyboard shortcuts:

Display or hide the Start menu. WIN Key
Display the System Properties dialog box. WIN Key+BREAK
Show the desktop. WIN Key+D
Minimize all windows. WIN Key+M
Restores minimized windows. WIN Key+Shift+M
Open My Computer. WIN Key+E
Search for a file or folder. WIN Key+F
Search for computers. CTRL+WIN Key+F
Display Windows Help. WIN Key+F1
Lock your computer if you are connected to a network domain, or switch users if you are not connected to a network domain. WIN Key+ L
Open the Run dialog box. WIN Key+R
Open Utility Manager. WIN Key+U

accessibility keyboard shortcuts:

Switch FilterKeys on and off. Right SHIFT for eight seconds
Switch High Contrast on and off. Left ALT+left SHIFT+PRINT SCREEN
Switch MouseKeys on and off. Left ALT +left SHIFT +NUM LOCK
Switch StickyKeys on and off. SHIFT five times
Switch ToggleKeys on and off. NUM LOCK for five seconds
Open Utility Manager. WIN Key+U

shortcuts you can use with Windows Explorer:

Display the bottom of the active window. END
Display the top of the active window. HOME
Display all subfolders under the selected folder. NUM LOCK+ASTERISK on numeric keypad (*)
Display the contents of the selected folder. NUM LOCK+PLUS SIGN on numeric keypad (+)
Collapse the selected folder. NUM LOCK+MINUS SIGN on numeric keypad (-)
Collapse current selection if it's expanded, or select parent folder. LEFT ARROW
Display current selection if it's collapsed, or select first subfolder. RIGHT ARROW

source: http://computerslearning.blogspot.com

see

part1

part2

Tag Technorati: {grup-tag},

http://learning-mudo.blogspot.com

»»  READMORE...

shortCut keyboard part2

commands in your Run Box (Windows Key + R) or Start Run

devmgmt.msc = Device Manager
msinfo32 = System Information
cleanmgr = Disk Cleanup
ntbackup = Backup or Restore Wizard (Windows Backup Utility)
mmc = Microsoft Management Console
excel = Microsoft Excel (If Installed)
msaccess = Microsoft Access (If Installed)
powerpnt = Microsoft PowerPoint (If Installed)
winword = Microsoft Word (If Installed)
frontpg = Microsoft FrontPage (If Installed)


notepad = Notepad
wordpad = WordPad
calc = Calculator
msmsgs = Windows Messenger
mspaint = Microsoft Paint
wmplayer = Windows Media Player
rstrui = System Restore
netscp6 = Netscape 6.x
netscp = Netscape 7.x
netscape = Netscape 4.x
waol = America Online
control = Opens the Control Panel
control printers = Opens the Printers Dialog

INTERNET BROWSER

type in u're adress "google", then press [Right CTRL] and [Enter]
add www. and .com to word and go to it

For Windows XP:

Copy. CTRL+C
Cut. CTRL+X
Paste. CTRL+V
Undo. CTRL+Z
Delete. DELETE
Delete selected item permanently without placing the item in the Recycle Bin. SHIFT+DELETE
Copy selected item. CTRL while dragging an item
Create shortcut to selected item. CTRL+SHIFT while dragging an item
Rename selected item. F2
Move the insertion point to the beginning of the next word. CTRL+RIGHT ARROW
Move the insertion point to the beginning of the previous word. CTRL+LEFT ARROW
Move the insertion point to the beginning of the next paragraph. CTRL+DOWN ARROW
Move the insertion point to the beginning of the previous paragraph. CTRL+UP ARROW
Highlight a block of text. CTRL+SHIFT with any of the arrow keys
Select more than one item in a window or on the desktop, or select text within a document. SHIFT with any of the arrow keys
Select all. CTRL+A
Search for a file or folder. F3
View properties for the selected item. ALT+ENTER
Close the active item, or quit the active program. ALT+F4
Opens the shortcut menu for the active window. ALT+SPACEBAR
Close the active document in programs that allow you to have multiple documents open simultaneously. CTRL+F4
Switch between open items. ALT+TAB
Cycle through items in the order they were opened. ALT+ESC
Cycle through screen elements in a window or on the desktop. F6
Display the Address bar list in My Computer or Windows Explorer. F4
Display the shortcut menu for the selected item. SHIFT+F10
Display the System menu for the active window. ALT+SPACEBAR
Display the Start menu. CTRL+ESC
Display the corresponding menu. ALT+Underlined letter in a menu name
Carry out the corresponding command. Underlined letter in a command name on an open menu
Activate the menu bar in the active program. F10
Open the next menu to the right, or open a submenu. RIGHT ARROW
Open the next menu to the left, or close a submenu. LEFT ARROW
Refresh the active window. F5
View the folder one level up in My Computer or Windows Explorer. BACKSPACE
Cancel the current task. ESC
SHIFT when you insert a CD into the CD-ROM drive Prevent the CD from automatically playing.

FOR DIALOGS BOX

To Press
Move forward through tabs. CTRL+TAB
Move backward through tabs. CTRL+SHIFT+TAB
Move forward through options. TAB
Move backward through options. SHIFT+TAB
Carry out the corresponding command or select the corresponding option. ALT+Underlined letter
Carry out the command for the active option or button. ENTER
Select or clear the check box if the active option is a check box. SPACEBAR
Select a button if the active option is a group of option buttons. Arrow keys
Display Help. F1
Display the items in the active list. F4
Open a folder one level up if a folder is selected in the Save As or Open dialog box. BACKSPACE

see :

part1 , part 3

publish by http://learning-mudo.blogspot.com

»»  READMORE...

Thursday, June 11, 2009

New policies adsense google 28 April 2009

Updates to the program policies page

If you've checked the AdSense program policies page today, you've probably noticed that we've just made a few small updates. We'd like to take a moment to clarify what's been changed.


The first thing you might notice when you visit the program policies page is that we've revamped the look. Based on your feedback, we've reorganized the content and updated the layout to make it easier to read and navigate. We've highlighted some key information for each policy, and added expandable 'Learn more' sections that you can click for more detailed information. Also, we've grouped together policies that are specific to only AdSense for content or AdSense for search.

There are also a few updates to the content of the program policies, which we've outlined below:

  • Google brand violations: This policy has always existed in our Terms and Conditions, but we've now brought it directly to the 'Ad Placement' section of the program policies page so that it's easier to find. According to this policy, we don't allow ads or search boxes to be placed on pages which misuse Google logos, trademarks, or other brand features in the page content or URL, and which could mislead users into thinking the page is associated with Google.
  • Deceptive implementations: We've clarified this policy a bit in the 'Encouraging Clicks' section of the program policies - ads may not be formatted in a way that makes them indistinguishable from other content on the page where they appear. This includes, for instance, formatting content to mimic ads, aligning images with ads, and placing ads under a misleading heading.
  • Ad placement in emails and email programs: This updated policy clarifies that Google ads , search boxes, and search results may not be placed in emails, as well as alongside emails.
  • Other Google products' policies: With this new policy, publishers aren't permitted to place ads, search boxes, or search results on, within, or alongside other Google products in a way that violates the policies of that other product or service. For instance, this would include placing ads on sites which allow users to download YouTube videos, which isn't permitted by the YouTube Terms of Service.

Finally, we've added more information to the 'Webmaster Guidelines' section and created a new 'Traffic Sources' section. Whether you regularly review the program policies or haven't reviewed them since you signed up for AdSense, we encourage you to visit the program policies page and check out the updates.
(Post has been updated to provide additional clarification.)
Posted by Winnie Creason - AdSense Publisher Support

Tag Technorati: {grup-tag}

 

Labels: Program Policies

source

»»  READMORE...

SHORTCUT KEYBOARD part 1

PART 1 

about many shortcut keyboard

Windows key + R = Run menu

cmd = Command Prompt


iexplore + "web address" = Internet Explorer


compmgmt.msc = Computer Management


dhcpmgmt.msc = DHCP Management


dnsmgmt.msc = DNS Management


services.msc = Services


eventvwr = Event Viewer


dsa.msc = Active Directory Users and Computers


dssite.msc = Active Directory Sites and Services


Windows key + E = Explorer

ALT + Tab = Switch between windows

ALT, Space, X = Maximize window

CTRL + Shift + Esc = Task Manager

Windows key + Break = System properties

Windows key + F = Search

Windows key + D = Hide/Display all windows

CTRL + C = copy

CTRL + X = cut

CTRL + V = paste

[Alt] and [Esc] Switch between running applications

[Alt] and letter Select menu item by underlined letter

[Ctrl] and [Esc] Open Program Menu

[Ctrl] and [F4] Close active document or group windows (does not work with some applications)

[Alt] and [F4] Quit active application or close current window

[Alt] and [-] Open Control menu for active document

Ctrl] Lft., Rt. arrow Move cursor forward or back one word

Ctrl] Up, Down arrow Move cursor forward or back one paragraph

[F1] Open Help for active application

Windows+M Minimize all open windows

Shift+Windows+M Undo minimize all open windows

Windows+F1 Open Windows Help

Windows+Tab Cycle through the Taskbar buttons

Windows+Break Open the System Properties dialog box

Acessability shortcuts

Right SHIFT for eight seconds........ Switch FilterKeys on and off.

Left ALT +left SHIFT +PRINT SCREEN....... Switch High Contrast on and off.

Left ALT +left SHIFT +NUM LOCK....... Switch MouseKeys on and off.

SHIFT....... five times Switch StickyKeys on and off.

NUM LOCK...... for five seconds Switch ToggleKeys on and off.

EXPLORER shortcuts

END....... Display the bottom of the active window.

HOME....... Display the top of the active window.

NUM LOCK+ASTERISK....... on numeric keypad (*) Display all subfolders under the selected folder.

NUM LOCK+PLUS SIGN....... on numeric keypad (+) Display the contents of the selected folder.

NUM LOCK+MINUS SIGN....... on numeric keypad (-) Collapse the selected folder.

LEFT ARROW...... Collapse current selection if it's expanded, or select parent folder.

RIGHT ARROW....... Display current selection if it's collapsed, or select first subfolder.

Tag Technorati: {grup-tag}

blog english

PART2

»»  READMORE...

Thursday, June 4, 2009

BUX.TO “EARN MONEY BY CLICK ADS “

BUX.TO

Welcome to Bux.to!

At Bux.to, you get paid to click on ads and visit websites. The process is easy! You simply click a link and view a website for 30 seconds to earn money. You can earn even more by referring friends. You'll get paid $0.01 for each website you personally view and $0.01 for each website your referrals view. Payment requests can be made every day and are processed through AlertPay or YourBuxCard.

Earnings Example
» You click 10 ads per day = $0.10
» 20 referrals click 10 ads per day = $2.00
» Your daily earnings = $2.10
» Your weekly earnings = $14.70
» Your monthly earnings = $63.00

The above example is based only on 20 referrals and 10 daily clicks. Some days you will have more clicks available, some days you will have less. What if you had more referrals? What if there were more ads available?

Thousands of satisfied members that have received their payment. If you're still not convinced, read the praise of our happy members.

Join now and receive a $0.05 Sign-up Bonus

 

Bux.to is NOT a Autosurf, Multi-Level Marketing, Pyramid, Ponzi, Matrix or "Get Rich Quick" scheme.

What is Bux.to?
Bux.to is a new innovative, international and FREE English based service that allows advertisers to reach thousands of potential customers by displaying their ad on our, "Surf Ads" page.

How to contact Bux.to?
We can be reached via contact form.

Business hours
10.00 am till 6.00 pm (GMT +4:00), Monday through Friday except public holidays.

How does it work?
You view websites in 30 second sessions via the "Surf Ads" page. Once the 30 seconds is up, you'll either get a green tick sign or a red 'X'. The green tick sign means you've earned $0.01 and as premium member $0.0125 for the visit and the 'X' means you have not earned money for the visit. You'll get red X's when you have more than one website from the "Surf Ads" page open. When this happens, you get no credit.

Don’t forget registered HERE ,DON’T WORRY IT’S FREE

»»  READMORE...